Abrasive
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Acid-base method
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Acid leaching
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Alumina
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Aluminum alloy 7014
Synthesis and Characterization of Al 7014 Nanostructure by Mechanical Alloying [Volume 3, Issue 3, 2014, Pages 79-87]
Aluminum foam
Friction Stir Welding of Commercially Pure Aluminum Foams Manufactured by Accumulative Roll-Bonding Process [Volume 3, Issue 3, 2014, Pages 35-42]
Amorphous Phases
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Apatite structure
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
B
B4C
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
BaTiO3
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Bioactive glass nanoparticles
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Boron carbide
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Boron carbide
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
C
Ca(OH)2 Nanoparticles
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Carbon nanotubes
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Carbothermal reduction
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
CdS thin layer
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Cemented carbides
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Chemical Bath Deposition
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Coercive force
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Composite
The effect of substrate preparation and the peak current density in pulse platingof Cu-SiCnanocompositecoatingsonmorphology, grain size, porosity, hardness and corrosion properties [Volume 3, Issue 2, 2014, Pages 27-35]
Composite
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Composite
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Contact Resistance
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Corrosion inhibitor
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Cr Complex
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Cu/Graphene nanocomposites
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Cu-Ni alloy
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
D
Dielectric Constant
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Dispersion
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Divalent lead
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Divalent nickel
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Doped Graphite
Storage Of Hydrogen Fuel In Metal Impregneted Graphene [Volume 3, Issue 1, 2014, Pages 55-60]
Dye-sensitized solar cell
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
E
Elecrtoless plating
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Electroplating
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Electrospinning
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Electrospinning
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Engine oil
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
F
Fatigue life
Fatigue Behavior of Biomedical Titanium Ti-6Al-4V Alloy [Volume 3, Issue 3, 2014, Pages 67-77]
Kinetics
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
L
Linseed oil
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
M
Magnetic saturation
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Mathematical Modeling
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
Mechanical activation
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Mechanical properties
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Microsphere
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Mild steel
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Modeling
Investigation of Thermal Stresses in Micro and Nano-Structured Thermal Barrier Coatings [Volume 3, Issue 3, 2014, Pages 27-33]
Modeling
Fabrication of Dye sensitized solar cell by spherical and Nano pore TiO2 structure [Volume 3, Issue 3, 2014, Pages 43-47]
N
Nano composite
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Nanocomposite
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
Nano composite coating
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Nanocomposites
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Nanocomposites
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Nanocomposites
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Nanofiber
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Nanoparticles
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Nanoparticles
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Nano photocatalysts
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Ni base coat
Effects of CeO2 addition on corrosion resistance and microstructure of the Ni-base coatings [Volume 3, Issue 4, 2014, Pages 43-52]
Ni/Cu contact
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
NiTiNb
Formation of amorphous and nano-crystalline phases via mechanical alloying of elemental powder with stoichiometric composition of Ni0.5Ti0.4Nb0.1 and their thermodynamic evaluation using Medima model [Volume 3, Issue 1, 2014, Pages 9-19]
O
Octanol
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Ordered mesoporous films
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
Oxygen Vacancies
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
P
Plasma spraying
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Polyaniline
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Protonation
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Purification
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Q
Q&P
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
R
Removal
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
S
Scaffold
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Schiff base
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Self-healing
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
SEM-EDX
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Shah-shahān house
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
SHS
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Silicon carbide
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Silicon carbide
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Silicon carbide
The effect of substrate preparation and the peak current density in pulse platingof Cu-SiCnanocompositecoatingsonmorphology, grain size, porosity, hardness and corrosion properties [Volume 3, Issue 2, 2014, Pages 27-35]
Sintering
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Solar Cell
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Sol- gel
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Sol-Gel
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
Sol-Gel
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Sol-Gel
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Sol-Gel
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Solvent extraction
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Solvothermal
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Spark Plasma Sintering
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Splat
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Strength
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Strontium titanate
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Sulfuric acid
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Synthesis
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
T
Thin films
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
TiCl4
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
TiO2
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
TiO2
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
TiO2-SnO2
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
Tissue engineering
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Tissue engineering
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Titanium diboride
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Titanium dioxide
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Titanium dioxide
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Titanium silicide
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
TOA
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Transverse rupture strength
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Tungsten oxide
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Tungsten oxide
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
W
Watts Bath
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
Wear
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Wetting
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Wood
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
X
XRD
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Y
Yttrium dopant
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Z
Zinc Doping
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]